Ammonium Persulphate CP ��� 500g

Ammonium Persulphate CP ��� Identification of Product
Chemical Code: CHE-A41
Chemical Name: Ammonium Persulphate
Chemical Grade: AR
Chemical Formula: H���N���O���S���
Chemical Weight: 228.20 g/mol
CAS No: 7727-54-0
Chemical Synonyms: AP
Ammonium Peroxodisulfate
APS
PER
Ammonium Peroxydisulfate

Ammonium Persulphate CP ��� Hazards Identification
REACH No: No Data Available
Signal Word: Danger
Supplemental Hazard Information:
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Ammonium Persulphate CP ��� Hazards statements
H272 ��� May intensify fire; oxidiser.
H302 ��� Harmful if swallowed.
H315 ��� Causes skin irritation.
H317 ��� May cause an allergic skin reaction.
H319 ��� Causes serious eye irritation.
H334 ��� May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 ��� May cause respiratory irritation.

Ammonium Persulphate CP ��� Precautionary statements
P220 ��� Keep/Store away from clothing/combustible materials.
P261 ��� Avoid breathing dust.
P280 ��� Wear protective gloves.
P305 + P351 + P338 ��� If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P342 + P311 ��� If experiencing respiratory symptoms: Call a Poison center or doctor/physician.

Ammonium Persulphate CP ��� Composition of Chemical
Chemical Formula: H���N���O���S���
EC No 1272/2008: No Data Available

Ammonium Persulphate CP ��� First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If: Skin Contact: Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If: Swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labeling section.
Immediate Medical Attention: No Data Available

Firefighting Measures
Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or Carbon Dioxide.
Hazards Arising: Nitrogen Oxides, Sulphur Oxides
Container explosion may occur under fire conditions.
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Info for Firefighting: May intensify fire; oxidiser.
Use water spray to cool unopened containers.

Accidental Release Measures
Personal Precautions: Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Enviromental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Method for Containment: Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations. Keep in suitable, closed containers for disposal.

Handling and Storage
Personal Precautions: Avoid contact with skin and eyes.
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Keep away from sources of ignition ��� No smoking.
Keep away from heat and sources of ignition.
Enviromental Precautions: Store in cool place.
Keep container tightly closed in a dry and well-ventilated place.
Moisture sensitive.
Storage class (TRGS 510): Oxidizing hazardous materials.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min.
Material tested: Dermatril��
Splash contact:
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min.
Material tested: Dermatril��
Data source: KCL GmbH, D-36124, Test method: EN 374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Physical and Chemical Properties
Appearance: White to pale Yellow powder, granular powder, or colourless, plate-like crystals
Odour: No Data Available
Odour Threshold: No Data Available
pH: 1.0 ��� 2.0 (228 g/l at 25 ��C)
Melting Point: Decomposes before melting
Boiling Point: Decomposes below the boiling point
Flash Point: No Data Available
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: No Data Available
Vapour pressure: No Data Available
Vapour density: 7.88 ��� (Air = 1.0)
Relative density: 1.980 g/cm3
Water solubility: Soluble
Partition Coefficien: No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: The substance or mixture is classified as oxidizing
Other Safety Info: Bulk density ��� 900 kg/m3.
Relative vapour density ��� 7.88 ��� (Air = 1.0)

Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: May decompose on exposure to moist air or water.
Stable under recommended storage conditions.
Possibility of hazardous reactions: No Data Available
Conditions to Avoid: No Data Available
Incompatible Materials: Strong reducing agents, Organic materials, Powdered metals
Hazardous Decomposition Products: No Data Available

Toxicological Information
Acute Toxicity: LD50 Oral ��� Rat ��� 689 mg/kg
LD50 Dermal ��� Rat -> 2.000 mg/kg
Skin Corrosion/Irritation: Skin ��� Rabbit
Result: No skin irritation
Serious Eye damage | Eye Irritation: Eyes ��� Rabbit
Result: Mild eye irritation (OECD Test Guideline 405
Cell Mutagenicity: No Data Available
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity ��� Single Exposure: May cause respiratory irritation
Specific Target Organ Toxicity ��� Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available

Ecological Information
Ecological Toxicity: Toxicity to fish: LC50 ��� Oncorhynchus mykiss (rainbow trout) ��� 76 mg/l ��� 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 ��� Daphnia magna (Water flea) ��� 120 mg/l ��� 48 h
Ecological Persistence and degradability: No Data Available
Bioaccumulative Potential: No Data Available
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: Harmful to aquatic life
Disposal Considerations
Waste Treatment Methods: Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.

Contaminated packaging
Dispose of as unused product.

Transport Information
UN Number: ADR/RID: 1444
IMDG: 1444
IATA: 1444
UN Shipping Hazard: ADR/RID: Ammonium Persulphate
IMDG: Ammonium Persulphate
IATA: Ammonium Persulphate
Transport Hazard Class: ADR/RID: 5.1
IMDG: 5.1
IATA: 5.1
Packaging Group: ADR/RID: III
IMDG: III
IATA: III
Enviromental Hazards: ADR/RID: no
IMDG Marine pollutant: no
IATA: no
Special Precautions: No Data Available
Regulatory Information
Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out.
Additional Info: RTECS: SE0350000
To the best of our knowledge, the chemical, physical and toxicological properties have not been thoroughly investigated.

DisclaimerThe information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is
confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product���s
properties.RLS Chemicals and its Associates shall not be held accountable for any damage���s consequent of handling the above product.

Add to Wishlist

Add to Wishlist