Aluminium Powder Fine CP ��� 500g

Aluminium Powder Fine CP ��� Identification of Product
Chemical Code: CHE-A16
Chemical Name: Aluminium Fine Powder
Chemical Grade: CP
Chemical Formula: Al
Chemical Weight: 26.98 g/mol
CAS No: 7429-90-5
Chemical Synonyms: No Data Available
Hazards Identification
REACH No: 01-2119529243-45-XXXX
Signal Word: Danger
Supplemental Hazard Information: None
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Aluminium Powder Fine CP ��� Hazards statements
H228 ��� Flammable solid.
Precautionary statements
P210 ��� Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P240 ��� Ground/bond container and receiving equipment.
P241 ��� Use explosion-proof electrical/ventilating/lighting/equipment.
P280 ��� Wear protective gloves/protective clothing/eye protection/face protection.
P370 + P378 ��� In case of fire: Use sand for extinction.

Aluminium Powder Fine CP ��� Composition of Chemical
Chemical Formula: Al
EC No 1272/2008: 01-2119529243-45-XXXX
First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If: Skin Contact: Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Flush eyes with water as a precaution.
If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labelling section.
Immediate Medical Attention: No Data Available

Firefighting Measures
Extinguishing Media: Suitable extinguishing media: Special powder against metal fire, dry sand. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray, alcohol-resistant foam, dry chemical or Carbon Dioxide. Unsuitable extinguishing media: Water, Carbon Dioxide (CO2) ABC Powder.
Hazards Arising: No Data Available
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Info for Firefighting: Use water spray to cool unopened containers.

Aluminium Powder Fine CP ��� Accidental Release Measures
Personal Precautions: Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas.
Enviromental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Method for Containment: Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations. Do not flush with water. Keep in suitable, closed containers for disposal. Contain spillage, pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container for disposal according to local regulations.

Aluminium Powder Fine CP ��� Handling and Storage
Personal Precautions: Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed. Keep away from sources of ignition.
No smoking. Take measures to prevent the build up of electrostatic charge.
Enviromental Precautions: Keep container tightly closed in a dry and well-ventilated place. Store in original container. Do not store near combustible materials. Keep in a cool place away from acids. Keep in a cool place away from bases. Keep in a cool place away from oxidizing agents. Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Handle and store under inert gas.

Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU).
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable
laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Protective gloves against thermal risks: Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested: Dermatril��
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Material tested: Dermatril��
Data source: KCL GmbH, D-36124, Test method: EN 374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Flame retardant anti-static protective clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Physical and Chemical Properties
Appearance: Silver powder
Odour: Odourless
Odour Threshold: No Data Available
pH: No Data Available
Melting Point: Melting point/range: 660��C
Boiling Point: 2.467 ��C
Flash Point: Not Applicable
Evaporation: No Data Available
Flammability: May form combustible dust concentrations in air.
Upper/Lower Flammability or Explosive Limits: No Data Available
Vapour pressure: No Data Available
Vapour density: No Data Available
Relative density: 2.7 g/cm��
Water solubility: Insoluble
Partition Coefficien: No Data Available
Auto-ignition Temperature: Not Auto-flammable
Decomposition Temperature: Not Applicable
Viscosity: No Data Available
Explosive properties: Risk of dust explosion
Oxidizing properties: No Data Available
Other Safety Info: No Data Available

Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: Stable under recommended storage conditions
Possibility of hazardous reactions: Risk of dust explosion. Reacts with water to generate Hydrogen gas.
Reacts with the following substances: Acids, Bases, Oxidizing Agents, Halogens.
Conditions to Avoid: Humid air, water, heat, flames and sparks.
Extremes of temperature and direct sunlight.
Incompatible Materials: Acids, Bases, Halogens, Oxidizing agents
Hazardous Decomposition Products: Hazardous decomposition products formed under fire conditions ��� Aluminum Oxide
Other decomposition products ��� No data available
Toxicological Information
Acute Toxicity: LD50 Oral ��� Rat -> 2.000 mg/kg
LC50 Inhalation ��� Rat ��� 4 h -> 888 mg/l
Skin Corrosion/Irritation: No Data Available
Serious Eye damage | Eye Irritation: No Data Available
Cell Mutagenicity: No Data Available
Carcinogenicity: IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity ��� Single Exposure: No Data Available
Specific Target Organ Toxicity ��� Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available

Ecological Information
Ecological Toxicity: No Data Available
Ecological Persistence and degradability: No Data Available
Bioaccumulative Potential: No Data Available
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: No Data Available
Disposal Considerations
Waste Treatment Methods: Product:
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging: Dispose of as unused product.

Transport Information
UN Number: ADR/RID: 1309
IMDG: 1309
IATA: 1309
UN Shipping Hazard: ADR/RID: Aluminium powder, coated
IMDG: Aluminium powder, coated
IATA: Aluminium powder, coated
Transport Hazard Class: ADR/RID: 4.1
IMDG: 4.1
IATA: 4.1
Packaging Group: ADR/RID: II
IMDG: II
IATA: II
Enviromental Hazards: ADR/RID: II
IMDG: II
IATA: II
Special Precautions: No Data Available

Regulatory Information
Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out.
Additional Info: RTECS: BD0330000
Cough, weight loss, anemia, weakness, in coordination.

Disclaimer
The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product���s
properties. RLS Chemicals and its Associates shall not be held accountable for any damage���s consequent of handling the above product.

Add to Wishlist

Add to Wishlist