Awaiting product image

Tetrabutyl Ammonium Hydroxide 0.10N

    R780.00 Ex VAT

    Tetrabutyl Ammonium Hydroxide 0.10N ��� Product identifier
    1 Identification
    2 Tetrabutyl Ammonium Hydroxide 0.10N ��� Hazard(s) identification
    Signal word Danger
    Hazard-determining components of labeling:
    Isopropanol
    Tetrabutylammonium Hydroxide 30-Hydrate
    Hazard statements
    Highly flammable liquid and vapor. Causes skin irritation.
    Causes serious eye damage.
    May cause drowsiness or dizziness.
    Precautionary statements
    Keep away from heat/sparks/open flames/hot surfaces. ��� No smoking. Ground/bond container and receiving equipment.
    Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
    Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling.
    Use only outdoors or in a well-ventilated area.
    Wear protective gloves/protective clothing/eye protection/face protection.
    If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
    If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    Immediately call a poison center/doctor. Specific treatment (see on this label).
    Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
    In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool.
    Store locked up.
    Dispose of contents/container in accordance with local/regional/national/international regulations.
    Classification system:
    NFPA ratings (scale 0 ��� 4)
    Other hazards
    Results of PBT and vPvB assessment
    PBT: Not applicable.
    vPvB: Not applicable.
    Trade name: Tetrabutyl Ammonium Hydroxide 0.10 Normal

    3 Tetrabutyl Ammonium Hydroxide 0.10N ��� Composition/information on ingredients
    �� Chemical characterization: Mixtures
    ��
    Description: Mixture of the substances listed below with nonhazardous additions.
    Chemical characterization: Substances
    CAS: 108-88-3
    Toluene
    73.444% ��� 73.446%
    CAS: 67-63-0
    Isopropanol
    16.627% ��� 16.629%
    CAS: 67-56-1
    Methanol
    6.872% ��� 6.874%
    CAS: 2052-49-5
    Tetrabutylammonium Hydroxide 30-Hydrate
    3.053% ��� 3.055%

    4 Tetrabutyl Ammonium Hydroxide 0.10N ��� First-aid measures
    ��
    Description of first aid measures
    ��
    General information: Immediately remove any clothing soiled by the product.
    ��
    After inhalation: In case of unconsciousness place patient stably in side position for transportation.
    ��
    After skin contact: Immediately wash with water and soap and rinse thoroughly.
    ��
    After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
    ��
    After swallowing: If symptoms persist consult doctor.
    ��
    Information for doctor:
    ��
    Most important symptoms and effects, both acute and delayed No further relevant information available.
    ��
    Indication of any immediate medical attention and special treatment needed
    No further relevant information available.

    5 Fire-fighting measures
    ��
    Extinguishing media
    ��
    Suitable extinguishing agents:
    CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
    ��
    Special hazards arising from the substance or mixture No further relevant information available.
    ��
    Advice for firefighters
    ��
    Protective equipment: No special measures required.

    Personal precautions, protective equipment and emergency procedures
    Wear protective equipment. Keep unprotected persons away.
    Environmental precautions:
    Dilute with plenty of water.
    Do not allow to enter sewers/ surface or ground water.
    Methods and material for containment and cleaning up:
    Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent.
    Dispose contaminated material as waste according to section 13. Ensure adequate ventilation.
    Reference to other sections
    See Section 7 for information on safe handling.
    See Section 8 for information on personal protection equipment. See Section 13 for disposal information.
    Protective Action Criteria for Chemicals
    �� PAC-1:
    CAS: 67-63-0
    Isopropanol
    400 ppm
    CAS: 2052-49-5
    Tetrabutylammonium Hydroxide 30-Hydrate
    1.2 mg/m��
    �� PAC-2:
    CAS: 67-63-0
    Isopropanol
    2000* ppm
    CAS: 2052-49-5
    Tetrabutylammonium Hydroxide 30-Hydrate
    13 mg/m��
    �� PAC-3:
    CAS: 67-63-0
    Isopropanol
    12000** ppm
    CAS: 2052-49-5
    Tetrabutylammonium Hydroxide 30-Hydrate
    79 mg/m��
    6 Accidental release measures

    7 Tetrabutyl Ammonium Hydroxide 0.10N ��� Handling and storage
    ��
    Handling:
    ��
    Precautions for safe handling
    Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
    ��
    Information about protection against explosions and fires:
    Keep ignition sources away ��� Do not smoke. Protect against electrostatic charges.
    ��
    Conditions for safe storage, including any incompatibilities
    ��
    Storage:
    ��
    Requirements to be met by storerooms and receptacles: Store in a cool location.
    ��
    Information about storage in one common storage facility: Not required.
    ��
    Further information about storage conditions:
    Keep receptacle tightly sealed.
    Store in cool, dry conditions in well sealed receptacles.
    ��
    Specific end use(s) No further relevant information available.

    Additional information about design of technical systems: No further data; see section 7.
    Control parameters
    Components with limit values that require monitoring at the workplace:
    The following constituent is the only constituent of the product which has a PEL, TLV or other recommended exposure limit.
    At this time, the remaining constituent has no known exposure limits.
    CAS: 67-63-0 Isopropanol
    PEL
    REL TLV
    Long-term value: 980 mg/m��, 400 ppm
    Short-term value: 1225 mg/m��, 500 ppm
    Long-term value: 980 mg/m��, 400 ppm Short-term value: 400 ppm
    Long-term value: 200 ppm
    BEI, A4
    �� Ingredients with biological limit values:
    CAS: 67-63-0 Isopropanol
    BEI
    40 mg/L
    LD50 Intraperitoneal: urine
    Time: end of shift at end of workweek LD50: Acetone (background, nonspecific)

    8 Exposure controls/personal protection
    ��
    Additional information: The lists that were valid during the creation were used as basis.
    ��
    Exposure controls
    ��
    Personal protective equipment:
    ��
    General protective and hygienic measures:
    Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
    Avoid contact with the skin.
    Avoid contact with the eyes and skin.
    �� Breathing equipment:
    In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
    �� Protection of hands:
    The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
    Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
    Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
    �� Material of gloves
    The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
    �� Penetration time of glove material
    The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
    �� Eye protection:
    ��
    Body protection: Protective work clothing

    9 Physical and chemical properties
    ��
    Information on basic physical and chemical properties
    ��
    General Information
    ��
    Appearance:
    Form: Solution
    Color: Clear Colourless to Pale Yellow
    ��
    Odor: Toluene-IPA
    ��
    Odor threshold: Not determined.
    �� pH-value: Not determined.
    Reactivity No further relevant information available.
    Chemical stability
    Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
    Possibility of hazardous reactions No dangerous reactions known.
    Conditions to avoid No further relevant information available.
    Incompatible materials: No further relevant information available.
    Hazardous decomposition products: No dangerous decomposition products known.
    �� Change in condition
    Melting point/Melting range: Undetermined.
    Boiling point/Boiling range: 65��C
    �� Flash point: 13 ��C (55.4 ��F)
    �� Flammability (solid, gaseous): Highly flammable.
    �� Auto igniting: 425 ��C (797 ��F)
    �� Decomposition temperature: Not determined.
    �� Ignition temperature: Product is not selfigniting.
    �� Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
    mixtures are possible.
    �� Explosion limits:
    Lower: 2 Vol %
    Upper: 12 Vol %
    �� Vapor pressure at 20 ��C (68 ��F): 43 hPa (32.3 mm Hg)
    �� Density at 20 ��C (68 ��F): 0.95 g/cm��
    ��
    Relative density Not determined.
    ��
    Vapor density Not determined.
    ��
    Evaporation rate Not determined.
    �� Solubility in / Miscibility with
    Water: Fully miscible.
    �� Partition coefficient (n-octanol/water): Not determined.
    �� Viscosity:
    Dynamic: Not determined.
    Kinematic: Not determined.
    �� Other information No further relevant information available.

    10 Stability and reactivity
    Information on toxicological effects
    Acute toxicity:
    Primary irritant effect:
    on the skin: Irritant to skin and mucous membranes.
    on the eye: Strong irritant with the danger of severe eye injury.
    Sensitization: No sensitizing effects known.
    Additional toxicological information:
    The product shows the following dangers according to internally approved calculation methods for preparations: Irritant
    Carcinogenic categories
    Toxicity
    Aquatic toxicity: No further relevant information available.
    Persistence and degradability No further relevant information available.
    Behavior in environmental systems:
    Bioaccumulative potential No further relevant information available.
    Mobility in soil No further relevant information available.
    Additional ecological information:
    General notes:
    Water hazard class 1 (Self-assessment): slightly hazardous for water
    Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Must not reach bodies of water or drainage ditch undiluted or unneutralized.
    Results of PBT and vPvB assessment
    PBT: Not applicable.
    vPvB: Not applicable.
    Other adverse effects No further relevant information available.
    Waste treatment methods
    Recommendation:
    Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
    Uncleaned packagings:
    Recommendation: Disposal must be made according to official regulations.
    Recommended cleansing agent: Water, if necessary with cleansing agents.
    (Contd. of page 6)
    11 Toxicological information
    �� IARC (International Agency for Research on Cancer)
    CAS: 67-63-0
    Isopropanol
    3
    �� NTP (National Toxicology Program)
    None of the ingredients is listed.
    �� OSHA-Ca (Occupational Safety & Health Administration)
    None of the ingredients is listed.

    12 Ecological information

    13 Disposal considerations

    14 Transport information
    ��
    UN-Number
    ��
    DOT, IMDG, IATA
    UN1993
    ��
    UN proper shipping name
    ��
    DOT
    Flammable liquids, n.o.s. (Isopropanol
    )
    �� IMDG, IATA
    FLAMMABLE LIQUID, N.O.S. (Isopropanol
    )
    �� Transport hazard class(es)
    �� DOT
    ��
    Class
    ��
    Label
    3 Flammable liquids
    3
    �� IMDG, IATA
    �� Class
    3 Flammable liquids
    �� Label
    3
    ��
    Packing group
    ��
    DOT, IMDG, IATA
    II
    ��
    Environmental hazards:
    ��
    Marine pollutant:
    No
    ��
    Special precautions for user Warning: Flammable liquids
    ��
    Hazard identification number (Kemler code): 33
    ��
    EMS Number: F-E,S-E
    ��
    Stowage Category B
    �� Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
    Not applicable.
    ��
    Transport/Additional information:
    ��
    DOT
    ��
    Quantity limitations
    On passenger aircraft/rail: 5 L On cargo aircraft only: 60 L
    ��
    IMDG
    ��
    Limited quantities (LQ)
    1L
    �� Excepted quantities (EQ)
    Code: E2
    Maximum net quantity per inner packaging: 30 ml
    Maximum net quantity per outer packaging: 500 ml
    �� UN ���Model Regulation���: UN 1993 FLAMMABLE LIQUID, N.O.S. (ISOPROPANOL
    ), 3, II
    15 Regulatory information
    �� Safety, health and environmental regulations/legislation specific for the substance or mixture
    No further relevant information available.
    ��
    Sara
    �� Section 355 (extremely hazardous substances):
    None of the ingredients is listed.
    �� Section 313 (Specific toxic chemical listings):
    CAS: 67-63-0
    Isopropanol
    �� TSCA (Toxic Substances Control Act):
    Isopropanol
    ACTIVE
    Water
    ACTIVE
    Tetrabutylammonium Hydroxide 30-Hydrate
    ACTIVE
    �� Hazardous Air Pollutants
    None of the ingredients is listed.
    ��
    Proposition 65
    �� Chemicals known to cause cancer:
    None of the ingredients is listed.
    �� Chemicals known to cause reproductive toxicity for females:
    None of the ingredients is listed.
    �� Chemicals known to cause reproductive toxicity for males:
    None of the ingredients is listed.
    �� Chemicals known to cause developmental toxicity:
    None of the ingredients is listed.
    ��
    Carcinogenic categories
    �� EPA (Environmental Protection Agency)
    None of the ingredients is listed.
    �� TLV (Threshold Limit Value)
    CAS: 67-63-0
    Isopropanol
    A4
    �� NIOSH-Ca (National Institute for Occupational Safety and Health)
    None of the ingredients is listed.
    ��
    GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
    �� Hazard pictograms
    ��
    Signal word Danger
    �� Hazard-determining components of labeling:
    Isopropanol
    Tetrabutylammonium Hydroxide 30-Hydrate
    �� Hazard statements
    Highly flammable liquid and vapor. Causes skin irritation.
    Causes serious eye damage.
    May cause drowsiness or dizziness.
    �� Precautionary statements
    Keep away from heat/sparks/open flames/hot surfaces. ��� No smoking. Ground/bond container and receiving equipment.
    Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
    Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling.
    Use only outdoors or in a well-ventilated area.
    Wear protective gloves/protective clothing/eye protection/face protection.
    If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
    If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
    Immediately call a poison center/doctor. Specific treatment (see on this label).
    Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
    In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool.
    Store locked up.
    Dispose of contents/container in accordance with local/regional/national/international regulations.
    ��
    Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
    This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
    Department issuing SDS: Environment protection department.
    Date of preparation / last revision
    Creation date for SDS: 14/05/2024
    Revision 1.0 20/03/2025: Reviewed SDS for accuracy. GW/STN
    16 Other information

    Add to Wishlist

    Add to Wishlist

    SKU: 42661 Tag:

      Tetrabutyl Ammonium Hydroxide 0.10N ��� Product identifier
      1 Identification
      2 Tetrabutyl Ammonium Hydroxide 0.10N ��� Hazard(s) identification
      Signal word Danger
      Hazard-determining components of labeling:
      Isopropanol
      Tetrabutylammonium Hydroxide 30-Hydrate
      Hazard statements
      Highly flammable liquid and vapor. Causes skin irritation.
      Causes serious eye damage.
      May cause drowsiness or dizziness.
      Precautionary statements
      Keep away from heat/sparks/open flames/hot surfaces. ��� No smoking. Ground/bond container and receiving equipment.
      Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
      Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling.
      Use only outdoors or in a well-ventilated area.
      Wear protective gloves/protective clothing/eye protection/face protection.
      If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
      If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
      Immediately call a poison center/doctor. Specific treatment (see on this label).
      Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
      In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool.
      Store locked up.
      Dispose of contents/container in accordance with local/regional/national/international regulations.
      Classification system:
      NFPA ratings (scale 0 ��� 4)
      Other hazards
      Results of PBT and vPvB assessment
      PBT: Not applicable.
      vPvB: Not applicable.
      Trade name: Tetrabutyl Ammonium Hydroxide 0.10 Normal

      3 Tetrabutyl Ammonium Hydroxide 0.10N ��� Composition/information on ingredients
      �� Chemical characterization: Mixtures
      ��
      Description: Mixture of the substances listed below with nonhazardous additions.
      Chemical characterization: Substances
      CAS: 108-88-3
      Toluene
      73.444% ��� 73.446%
      CAS: 67-63-0
      Isopropanol
      16.627% ��� 16.629%
      CAS: 67-56-1
      Methanol
      6.872% ��� 6.874%
      CAS: 2052-49-5
      Tetrabutylammonium Hydroxide 30-Hydrate
      3.053% ��� 3.055%

      4 Tetrabutyl Ammonium Hydroxide 0.10N ��� First-aid measures
      ��
      Description of first aid measures
      ��
      General information: Immediately remove any clothing soiled by the product.
      ��
      After inhalation: In case of unconsciousness place patient stably in side position for transportation.
      ��
      After skin contact: Immediately wash with water and soap and rinse thoroughly.
      ��
      After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
      ��
      After swallowing: If symptoms persist consult doctor.
      ��
      Information for doctor:
      ��
      Most important symptoms and effects, both acute and delayed No further relevant information available.
      ��
      Indication of any immediate medical attention and special treatment needed
      No further relevant information available.

      5 Fire-fighting measures
      ��
      Extinguishing media
      ��
      Suitable extinguishing agents:
      CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
      ��
      Special hazards arising from the substance or mixture No further relevant information available.
      ��
      Advice for firefighters
      ��
      Protective equipment: No special measures required.

      Personal precautions, protective equipment and emergency procedures
      Wear protective equipment. Keep unprotected persons away.
      Environmental precautions:
      Dilute with plenty of water.
      Do not allow to enter sewers/ surface or ground water.
      Methods and material for containment and cleaning up:
      Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralizing agent.
      Dispose contaminated material as waste according to section 13. Ensure adequate ventilation.
      Reference to other sections
      See Section 7 for information on safe handling.
      See Section 8 for information on personal protection equipment. See Section 13 for disposal information.
      Protective Action Criteria for Chemicals
      �� PAC-1:
      CAS: 67-63-0
      Isopropanol
      400 ppm
      CAS: 2052-49-5
      Tetrabutylammonium Hydroxide 30-Hydrate
      1.2 mg/m��
      �� PAC-2:
      CAS: 67-63-0
      Isopropanol
      2000* ppm
      CAS: 2052-49-5
      Tetrabutylammonium Hydroxide 30-Hydrate
      13 mg/m��
      �� PAC-3:
      CAS: 67-63-0
      Isopropanol
      12000** ppm
      CAS: 2052-49-5
      Tetrabutylammonium Hydroxide 30-Hydrate
      79 mg/m��
      6 Accidental release measures

      7 Tetrabutyl Ammonium Hydroxide 0.10N ��� Handling and storage
      ��
      Handling:
      ��
      Precautions for safe handling
      Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
      ��
      Information about protection against explosions and fires:
      Keep ignition sources away ��� Do not smoke. Protect against electrostatic charges.
      ��
      Conditions for safe storage, including any incompatibilities
      ��
      Storage:
      ��
      Requirements to be met by storerooms and receptacles: Store in a cool location.
      ��
      Information about storage in one common storage facility: Not required.
      ��
      Further information about storage conditions:
      Keep receptacle tightly sealed.
      Store in cool, dry conditions in well sealed receptacles.
      ��
      Specific end use(s) No further relevant information available.

      Additional information about design of technical systems: No further data; see section 7.
      Control parameters
      Components with limit values that require monitoring at the workplace:
      The following constituent is the only constituent of the product which has a PEL, TLV or other recommended exposure limit.
      At this time, the remaining constituent has no known exposure limits.
      CAS: 67-63-0 Isopropanol
      PEL
      REL TLV
      Long-term value: 980 mg/m��, 400 ppm
      Short-term value: 1225 mg/m��, 500 ppm
      Long-term value: 980 mg/m��, 400 ppm Short-term value: 400 ppm
      Long-term value: 200 ppm
      BEI, A4
      �� Ingredients with biological limit values:
      CAS: 67-63-0 Isopropanol
      BEI
      40 mg/L
      LD50 Intraperitoneal: urine
      Time: end of shift at end of workweek LD50: Acetone (background, nonspecific)

      8 Exposure controls/personal protection
      ��
      Additional information: The lists that were valid during the creation were used as basis.
      ��
      Exposure controls
      ��
      Personal protective equipment:
      ��
      General protective and hygienic measures:
      Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work.
      Avoid contact with the skin.
      Avoid contact with the eyes and skin.
      �� Breathing equipment:
      In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
      �� Protection of hands:
      The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
      Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
      Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
      �� Material of gloves
      The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
      �� Penetration time of glove material
      The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
      �� Eye protection:
      ��
      Body protection: Protective work clothing

      9 Physical and chemical properties
      ��
      Information on basic physical and chemical properties
      ��
      General Information
      ��
      Appearance:
      Form: Solution
      Color: Clear Colourless to Pale Yellow
      ��
      Odor: Toluene-IPA
      ��
      Odor threshold: Not determined.
      �� pH-value: Not determined.
      Reactivity No further relevant information available.
      Chemical stability
      Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
      Possibility of hazardous reactions No dangerous reactions known.
      Conditions to avoid No further relevant information available.
      Incompatible materials: No further relevant information available.
      Hazardous decomposition products: No dangerous decomposition products known.
      �� Change in condition
      Melting point/Melting range: Undetermined.
      Boiling point/Boiling range: 65��C
      �� Flash point: 13 ��C (55.4 ��F)
      �� Flammability (solid, gaseous): Highly flammable.
      �� Auto igniting: 425 ��C (797 ��F)
      �� Decomposition temperature: Not determined.
      �� Ignition temperature: Product is not selfigniting.
      �� Danger of explosion: Product is not explosive. However, formation of explosive air/vapor
      mixtures are possible.
      �� Explosion limits:
      Lower: 2 Vol %
      Upper: 12 Vol %
      �� Vapor pressure at 20 ��C (68 ��F): 43 hPa (32.3 mm Hg)
      �� Density at 20 ��C (68 ��F): 0.95 g/cm��
      ��
      Relative density Not determined.
      ��
      Vapor density Not determined.
      ��
      Evaporation rate Not determined.
      �� Solubility in / Miscibility with
      Water: Fully miscible.
      �� Partition coefficient (n-octanol/water): Not determined.
      �� Viscosity:
      Dynamic: Not determined.
      Kinematic: Not determined.
      �� Other information No further relevant information available.

      10 Stability and reactivity
      Information on toxicological effects
      Acute toxicity:
      Primary irritant effect:
      on the skin: Irritant to skin and mucous membranes.
      on the eye: Strong irritant with the danger of severe eye injury.
      Sensitization: No sensitizing effects known.
      Additional toxicological information:
      The product shows the following dangers according to internally approved calculation methods for preparations: Irritant
      Carcinogenic categories
      Toxicity
      Aquatic toxicity: No further relevant information available.
      Persistence and degradability No further relevant information available.
      Behavior in environmental systems:
      Bioaccumulative potential No further relevant information available.
      Mobility in soil No further relevant information available.
      Additional ecological information:
      General notes:
      Water hazard class 1 (Self-assessment): slightly hazardous for water
      Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Must not reach bodies of water or drainage ditch undiluted or unneutralized.
      Results of PBT and vPvB assessment
      PBT: Not applicable.
      vPvB: Not applicable.
      Other adverse effects No further relevant information available.
      Waste treatment methods
      Recommendation:
      Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
      Uncleaned packagings:
      Recommendation: Disposal must be made according to official regulations.
      Recommended cleansing agent: Water, if necessary with cleansing agents.
      (Contd. of page 6)
      11 Toxicological information
      �� IARC (International Agency for Research on Cancer)
      CAS: 67-63-0
      Isopropanol
      3
      �� NTP (National Toxicology Program)
      None of the ingredients is listed.
      �� OSHA-Ca (Occupational Safety & Health Administration)
      None of the ingredients is listed.

      12 Ecological information

      13 Disposal considerations

      14 Transport information
      ��
      UN-Number
      ��
      DOT, IMDG, IATA
      UN1993
      ��
      UN proper shipping name
      ��
      DOT
      Flammable liquids, n.o.s. (Isopropanol
      )
      �� IMDG, IATA
      FLAMMABLE LIQUID, N.O.S. (Isopropanol
      )
      �� Transport hazard class(es)
      �� DOT
      ��
      Class
      ��
      Label
      3 Flammable liquids
      3
      �� IMDG, IATA
      �� Class
      3 Flammable liquids
      �� Label
      3
      ��
      Packing group
      ��
      DOT, IMDG, IATA
      II
      ��
      Environmental hazards:
      ��
      Marine pollutant:
      No
      ��
      Special precautions for user Warning: Flammable liquids
      ��
      Hazard identification number (Kemler code): 33
      ��
      EMS Number: F-E,S-E
      ��
      Stowage Category B
      �� Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
      Not applicable.
      ��
      Transport/Additional information:
      ��
      DOT
      ��
      Quantity limitations
      On passenger aircraft/rail: 5 L On cargo aircraft only: 60 L
      ��
      IMDG
      ��
      Limited quantities (LQ)
      1L
      �� Excepted quantities (EQ)
      Code: E2
      Maximum net quantity per inner packaging: 30 ml
      Maximum net quantity per outer packaging: 500 ml
      �� UN ���Model Regulation���: UN 1993 FLAMMABLE LIQUID, N.O.S. (ISOPROPANOL
      ), 3, II
      15 Regulatory information
      �� Safety, health and environmental regulations/legislation specific for the substance or mixture
      No further relevant information available.
      ��
      Sara
      �� Section 355 (extremely hazardous substances):
      None of the ingredients is listed.
      �� Section 313 (Specific toxic chemical listings):
      CAS: 67-63-0
      Isopropanol
      �� TSCA (Toxic Substances Control Act):
      Isopropanol
      ACTIVE
      Water
      ACTIVE
      Tetrabutylammonium Hydroxide 30-Hydrate
      ACTIVE
      �� Hazardous Air Pollutants
      None of the ingredients is listed.
      ��
      Proposition 65
      �� Chemicals known to cause cancer:
      None of the ingredients is listed.
      �� Chemicals known to cause reproductive toxicity for females:
      None of the ingredients is listed.
      �� Chemicals known to cause reproductive toxicity for males:
      None of the ingredients is listed.
      �� Chemicals known to cause developmental toxicity:
      None of the ingredients is listed.
      ��
      Carcinogenic categories
      �� EPA (Environmental Protection Agency)
      None of the ingredients is listed.
      �� TLV (Threshold Limit Value)
      CAS: 67-63-0
      Isopropanol
      A4
      �� NIOSH-Ca (National Institute for Occupational Safety and Health)
      None of the ingredients is listed.
      ��
      GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
      �� Hazard pictograms
      ��
      Signal word Danger
      �� Hazard-determining components of labeling:
      Isopropanol
      Tetrabutylammonium Hydroxide 30-Hydrate
      �� Hazard statements
      Highly flammable liquid and vapor. Causes skin irritation.
      Causes serious eye damage.
      May cause drowsiness or dizziness.
      �� Precautionary statements
      Keep away from heat/sparks/open flames/hot surfaces. ��� No smoking. Ground/bond container and receiving equipment.
      Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.
      Take precautionary measures against static discharge. Avoid breathing dust/fume/gas/mist/vapors/spray Wash thoroughly after handling.
      Use only outdoors or in a well-ventilated area.
      Wear protective gloves/protective clothing/eye protection/face protection.
      If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing.
      If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
      Immediately call a poison center/doctor. Specific treatment (see on this label).
      Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
      In case of fire: Use CO2, powder or water spray to extinguish. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool.
      Store locked up.
      Dispose of contents/container in accordance with local/regional/national/international regulations.
      ��
      Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
      This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
      Department issuing SDS: Environment protection department.
      Date of preparation / last revision
      Creation date for SDS: 14/05/2024
      Revision 1.0 20/03/2025: Reviewed SDS for accuracy. GW/STN
      16 Other information

      Add to Wishlist

      Add to Wishlist